3G-SDI Fiber Multiplexer, 3G-SDI Multiplexers, VOS-2H3G-ADCET/R

Home > 3G HD-SDI Video over Fiber > 3G-SDI Fiber Optic Extenders > VOS-2H3G-ADCET/R

2-Channel 3G-SDI, Audio, Data, Contact Closure & IP

View more full-size: IMG1 - IMG2 - IMG3

• 2-Channel Uncompressed 3G-SDI
• Support Muti-rate 19.4M to 2.97Gbps
• Support Duplex Audio & Serial Data
• Support Contact Closure & IP Ethernet
• Support Embedded Digital audio
• Support 19inch 1U Rack

3G-SDI	Audio	Data	Contact Closure	IP Ethernet
			or

PDF Datasheets	Installation Manual
VOS-2H3G-ADCET/R Datasheet	VOS-2H3G-ADCET/R Manual

System Design

3G-SDI Fiber Multiplexer VOS-2H3G-ADCET/R provides for the digital transmission of 2-Channel uncompressed 2.97Gbps 3G-SDI (SMPTE 424M), 1.485 Gbps HD-SDI (SMPTE 292) or 270 Mbps SD-SDI (SMPTE 259M) 1080P HD video over fiber, support 2 duplex analog audio, 1 duplex RS232/RS485 serial data and 2 simplex contact closure or 1 duplex contact closure, and IP Ethernet. also support one loopback output for local display, and dual outputs for two displays in the remote end. This unit only can support 19inch 1U Rack.

Single-Mode or Multi-Mode, VOS-2H3G-ADCET/R can support FC/PC or ST/PC optical connector, the transmission distance range according to the Optical Budget. Manufacturer's standard is: Single-mode 20km, Multi-mode 300m.

Features

• Extends uncompressed multi-rate 3G-SDI, HD-SDI or SD-SDI video over fiber
• Supports SMPTE 424M, SMPTE 292M, SMPTE 259M or DVB-ASI compliant
• Supports embedded digital audio stream
• Multimode Fiber Support for Distances up to 300m.
• Single-Mode Fiber Support for Distances up to 20km.
• Real-Time Video Transmission for Exceptional Quality and Resolution
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Produce according to customer's specifications, providing OEM

Specifications

• Video
Number of Channels:	2-Channel 3G-SDI, HD-SDI or SD-SDI
Data Rate:	19.4 Mbps to 2.97 Gbps
Standards:	SMPTE 424M, SMPTE 292M, SMPTE 259M or DVB-ASI
Max Resolution	1920 x 1080 @ 60Hz
Equalization:	Automatic up to 100m of Belden 1694A at 3.0 Gbps, 200m at 1.485 Gbps and 350m at 270 Mbps
Return Loss:	> 15dB to 1.485Gbps: > 10dB to 2.97 Gbps
• Audio
Number of Channels:	2-Channel Duplex Analog Audio
Audio input/output impedance:	600 Ohm Unbalanced
Bandwidth:	20Hz ~ 20KHz
Bit Resolution:	24-Bit
Signal-to-Noise Ratio(SNR):	> 80 dB
• Data
Data Formats:	1-Channel Duplex RS232 & RS485 Data
Data Rate:	DC to 115.2Kbps
Bit Error Rate:	10E-9
• Contact Closure
Number of Channels:	2-Ch Simplex or 1 Duplex Contact Closure
Data Formats:	Contact Closure, TTL
Data Rate:	DC to 200Kbps
Response Time:	2 ms
Relay/Contact Rating:	0.5 A @ 30VDC
Bit Error Rate:	< 10E-9
• Ethernet/IP
Standard:	Ethernet IEEE 802.3 (Auto-Negotiation)
Data Rate:	10/100 Mbps
Connector:	RJ-45
• Connectors
Video Connector:	75 Ohm BNC (Gold Center Pin)
Audio Connector:	Terminal Block
Data Connector:	Terminal Block
Contact Closure Connector:	Terminal Block
Optical Connector:	FC/PC or ST/PC Optional
Stand-Alone Power:	Screw terminal block
Rack Power:	AC line cord
• Electrical & Mechanical
Input Power Requirements:	DC 5V@4A
Power Adapter:	AC 100V~240V (Built-in)
Power Consumption:	< 10W
19inch 1U Dimensions:	483mm × 255mm × 46mm
Shipping Weight:	8kg (include Transmitter & Receiver)
• Environmental
Operating Temperature:	-40°C ~ +75°C
Storage Temperature:	-40°C ~ +85°C
Relative Humidity:	0% ~ 95% (non-condensing)
MTBF:	>100,000 hours

Ordering Information & Optical Specifications

Model Number		Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
Transmitter	Receiver	Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
VOS-2H3G-ADCEMT	VOS-2H3G-ADCEMR	MM	1310/1550nm	16dB	300m
VOS-2H3G-ADCEST	VOS-2H3G-ADCESR	SM	1310/1550nm	12dB	20km
Note: • The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm). • When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget. • Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. • Maximum transmission distance is also limited by fiber bandwidth. • Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug. • Please feel free to consult factory for any special requirement and customization.

Typical Configuration

Note: Due to continuous improvement, all 3G-SDI Fiber Multiplexer and 3G-SDI Fiber Optic Extenders product specifications are subject to change without further notice.