Video Optical Multiplexer – 48 Channels Video Multiplexer

Home > Fiber Optic Transmission Systems > Fiber Optic Video > VOS-48000FT/R

Video Optical Multiplexer, 48-Channel Video Multiplexer

Video	Audio	Data	PDF Datasheets	Installation Manual
	--	--	VOS-48000FT/R Datasheet	VOS-48000FT/R Manual

System Design

Fiber Optic Video Multiplexer VOS-48000FT/R can transmission 48-Channel video over fiber optical cable for fixed camera, no audio, no data.
Only support Stand-alone 19 inch 2U rack. All Video Optical Multiplexer units of VOS-48000FT/R can not be used by video card style.
Only support Single-Mode VOS-48000FT/R can support FC or ST connector, can be used in Daisy-Chain system(Need to customize) The Transmission distance range according to the Optical Budget. Manufacturer's standard is: Single-mode 20km.

Features

• Support Point-to-Point or Daisy-Chain connection
• Uncompressed Digital Composite Video over one fiber
• Compatible with all PAL, NTSC,SECAM Video Systems
• Single-Mode Fiber Support for Distances up to 20 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Support Coarse Wavelength Division Multiplexing (CWDM)
• Produce according to customer's specifications,providing OEM

Specifications

• Video
Number of Channels:	48 Channels Video
Video input/output impedance:	BNC 75 Ω
Video input/output Compatibility:	PAL, NTSC,SECAM
Video input/output voltage:	1.0 Volt p-p
Bandwidth:	6.5MHZ
Bit Resolution:	8-Bit Digital Transmission
Differential Gain:	< 1.5%
Differential Phase:	< 1.5 °
Tilt:	< 5%
Signal-to-Noise Ratio(SNR):	> 67 dB
• Connectors
Video:	75 Ohm BNC (Gold Center Pin)
Optical:	FC (standard), ST Optional
Stand-Alone Power:	Screw terminal block
Rack Power:	AC line cord
• Electrical & Mechanical
Input Power Requirements:	DC 5V@6A
Power Adapter:	AC 100V~240V (Built-in)
Power Consumption:	< 20W
Stand-Alone Dimensions:	483mm × 250mm × 89mm (19inch 2U Rack)
Shipping Weight:	12kg (include Transmitter & Receiver)
• Environmental
Operating Temperature:	-40°C ~ +75°C
Storage Temperature:	-40°C ~ +85°C
Relative Humidity:	0% ~ 95% (non-condensing)
MTBF:	>100,000 hours

Ordering Information & Optical Specifications

Model Number		Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
Transmitter	Receiver	Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
VOS-48000FST	VOS-48000FSR	Single-Mode	1430nm~1550nm	10dB	20km
Note: • The Optical Power Budget data fit Single-Mode(9/125 μm). • Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. • Maximum transmission distance is also limited by fiber bandwidth. • Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug. • Please feel free to consult factory for any special requirement and customization.

Typical Configuration

Note: Due to continuous improvement, all fiber optic transmission systems and Video Optical Multiplexer product specifications are subject to change without further notice.