HD-SDI Fiber Transmitter, HD-SDI Transmitter over Fiber, VOS-2HD-ADT/R

Home > 3G HD-SDI Video over Fiber > HD-SDI Fiber Optic Extenders > VOS-2HD-ADT/R

2-Channel HD-SDI + 2 Duplex Audio + 1 Duplex Data

View more full-size: IMG1 - IMG2 - IMG3

• Uncompressed 2-Channel HD-SDI
• Support SMPTE 292M, SMPTE 259M
• Support Muti-rate 270M ~ 1.485Gbps
• Support Embedded Digital audio
• Single-mode 20km or Multi-mode 300m
• Support 19inch 1U Rack

HD-SDI	Audio	Data	PDF Datasheets	Installation Manual
			VOS-2HD-ADT/R Datasheet	VOS-2HD-ADT/R Manual

System Design

HD-SDI Fiber Transmitter and Receiver VOS-2HD-ADT/R provides for the digital transmission of 2-Channel uncompressed 1.485 Gbps HD-SDI (SMPTE 292) or 270 Mbps SD-SDI (SMPTE 259M) 1080P HD video over fiber, and support 2 duplex analog audio and 1 duplex RS232/RS485 serial data, also support one loopback output for local display, and dual outputs for two displays in the remote end. This unit only can support 19inch 1U Rack.

Single-Mode or Multi-Mode, VOS-2HD-ADT/R can support FC/PC or ST/PC optical connector, the transmission distance range according to the Optical Budget. Manufacturer's standard is: Single-mode 20km, Multi-mode 300m.

Features

• Extends uncompressed HD-SDI or SD-SDI video over fiber
• Supports SMPTE 292M, SMPTE 259M or DVB-ASI compliant
• Supports embedded digital audio stream
• Multimode Fiber Support for Distances up to 300m.
• Single-Mode Fiber Support for Distances up to 20 km.
• Real-Time Video Transmission for Exceptional Quality and Resolution
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Produce according to customer's specifications, providing OEM

Specifications

• Video
Number of Channels:	2-Channel HD-SDI or SD-SDI
Data Rate:	1.485 Gbps; 270 Mbps
Standards:	SMPTE 292M, SMPTE 259M or DVB-ASI
Max Resolution	1920 x 1080 @ 60Hz
Equalization:	Automatic up to 200m at 1.485 Gbps and 350m at 270 Mbps of Belden 1694A
Return Loss:	> 15dB to 1.485Gbps:
• Audio
Number of Channels:	2-Channel Duplex Analog Audio
Audio input/output impedance:	600 Ohm Unbalanced
Bandwidth:	20Hz ~ 20KHz
Bit Resolution:	24-Bit
Signal-to-Noise Ratio(SNR):	> 80 dB
• Data
Data Formats:	1-Channel Duplex RS232 & RS485 Data
Data Rate:	DC to 115.2Kbps
Bit Error Rate:	10E-9
• Connectors
Video Connector:	75 Ohm BNC (Gold Center Pin)
Audio Connector:	Terminal Block
Data Connector:	Terminal Block
Optical Connector:	FC/PC or ST/PC optional
Stand-Alone Power:	Screw terminal block
Rack Power:	AC line cord
• Electrical & Mechanical
Input Power Requirements:	DC 5V@4A
Power Adapter:	AC 100V~240V (Built-in)
Power Consumption:	< 10W
Stand-Alone Dimensions:	483mm × 255mm × 46mm
Shipping Weight:	8kg (include Transmitter & Receiver)
• Environmental
Operating Temperature:	-40°C ~ +75°C
Storage Temperature:	-40°C ~ +85°C
Relative Humidity:	0% ~ 95% (non-condensing)
MTBF:	>100,000 hours

Ordering Information & Optical Specifications

Model Number		Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
Transmitter	Receiver	Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
VOS-2HD-ADMT	VOS-2HD-ADMR	MM	1310nm/1550nm	16dB	300m
VOS-2HD-ADST	VOS-2HD-ADSR	SM	1310nm/1550nm	12dB	20km
Note: • The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm). • When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget. • Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. • Maximum transmission distance is also limited by fiber bandwidth. • Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug. • Please feel free to consult factory for any special requirement and customization.

Typical Configuration

Note: Due to continuous improvement, all HD-SDI Fiber Transmitter and Receiver and HD-SDI Fiber Optic Extenders product specifications are subject to change without further notice.