Video, Audio, Data, Ehternet Fiber Optic Multiplexer

Home > Fiber Optic Transmission Systems > Fiber Optic Converter > VOS-88101FFDET/R

8 Video + 8 Simplex Audio + 1 Duplex Data + IP Ethernet

View more full-size: IMG1 - IMG2 - IMG3

• Uncompressed Composite Video
• 24-Bit Digitally Encoded Analog Audio
• Data support RS485, RS232 or RS422
• Support Multi-mode Fiber up to 1.2km
• Support Single-mode Fiber up to 100km
• Stand-alone or Rack-mount

Video	Audio	Data	Ethernet	PDF Datasheets	Installation Manual
				VOS-88101FFDET/R Datasheet	VOS-88101FFDET/R Manual

System Design

Video & Audio & Data Fiber Optic Converter VOS-88101FFDET/R provides for the digital transmission of 8-Channel Composite Video and 8 simplex audio, 1 duplex data and 10M/100M IP Ethernet. Data support RS485, RS232, RS422 protocols. Ideal for Broadcast /Studio, CCTV audio and Professional AV applications.

Stand-alone or rack-mount. All units of VOS-88101FFDET/R come in an insert card version.The cards can be inserted into our 14-slot, 19inch 4U or 6U rack-mountable card cage (VOS-CH04 or VOS-CH06). The card version of this model require two slots widths.

Single-Mode or Multi-Mode, VOS-88101FFDET/R can support FC /PC or ST/PC Optical connector, can be used in Daisy-Chain system (Need to customize). The Transmission distance range according to the Optical Budget. Manufacturer's standard is: Single-mode 20km or Multi-mode 1.2km.

Features

• Support Point-to-Point or Daisy-Chain connection
• Uncompressed Digital Composite Video over one fiber
• 24-Bit Digitally Encoded Analog Audio over one Fiber
• Data support RS485(2-wire or 4-wire),RS232,RS422, Contact Closure
• Compatible with all PAL, NTSC,SECAM Video Systems
• Multimode Fiber Support for Distances up to 1.2 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Produce according to customer's specifications,providing OEM

Specifications

• Video
Number of Channels:	8 Channels Video
Video input/output impedance:	BNC 75 Ω
Video input/output Compatibility:	PAL, NTSC,SECAM
Video input/output voltage:	1.0 Volt p-p
Bandwidth:	6.5MHZ
Bit Resolution:	8-Bit Digital Transmission
Differential Gain:	< 1.5%
Differential Phase:	< 1.5 °
Tilt:	< 5%
Signal-to-Noise Ratio(SNR):	> 67 dB
• Audio
Number of Channels:	8 Channels Simplex Audio
Audio input/output Level:	6 dBm
Audio input/output impedance:	600 Ω Unbalanced
Bandwidth:	20Hz ~ 20KHz
Bit Resolution:	24-Bit
Signal-to-Noise Ratio(SNR):	> 80 dB
• Data
Data Formats:	RS485(2-wire or 4-wire),RS232,RS422,Contact Closure
Data Rate:	DC to 115.2Kbps
Bit Error Rate:	10E-9
• Ethernet/IP
Standard:	Ethernet IEEE 802.3 (Auto-Negotiation)
Data Rate:	10/100 Mbps
Connector:	RJ-45, Auto MDI/MDI-X
• Connectors
Video:	75 Ohm BNC (Gold Center Pin)
Audio:	Terminal Block
Data:	Terminal Block
Optical:	FC/PC or ST/PC Optional
Stand-Alone Power:	Screw terminal block
Rack Power:	AC line cord
• Electrical & Mechanical
Input Power Requirements:	DC 5V@3A
Power Adapter:	AC 100V~240V
Power Consumption:	< 5W
Stand-Alone Dimensions:	176.5mm × 158mm × 59mm
Card for 4U Rack Dimensions:	145mm × 170mm × 45.4mm (two slots)
Shipping Weight:	2.5kg (include Transmitter & Receiver)
• Environmental
Operating Temperature:	-40°C ~ +75°C
Storage Temperature:	-40°C ~ +85°C
Relative Humidity:	0% ~ 95% (non-condensing)
MTBF:	>100,000 hours

Ordering Information & Optical Specifications

Model Number		Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
Transmitter	Receiver	Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
VOS-88101FFDEMT	VOS-88101FFDEMR	MM	1310/1550nm	12dB	1.2km
VOS-88101FFDEST	VOS-88101FFDESR	SM	1310/1550nm	12dB	20km
VOS-88101FFDEST-4	VOS-88101FFDESR-4	SM	1310/1550nm	18dB	40km
VOS-88101FFDEST-6	VOS-88101FFDESR-6	SM	1310/1550nm	25dB	60km
Note: • The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm). • When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget. • Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. • Maximum transmission distance is also limited by fiber bandwidth. • Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug. • Please feel free to consult factory for any special requirement and customization.